When It's Time For Patio Door Lock Replacement

If your patio door lock isn't working correctly, it could be time for a replacement locks for patio doors. It's a fairly simple process.

The first step is to identify the type of lock you own. You can do this by observing the position of the keyway within the lock assembly. Some keyways are vertical, while others have an angle of 45 degrees.

Identifying your current lock

The patio door is a common point of entry for burglars. This is because it usually opens into an open or ventilating position. It is usually located at the back of the property making it easy to conceal an incline or other equipment for climbing. It is crucial to secure your patio door, whether you want to prevent children from leaving the home or deter a burglar.

You should familiarize yourself with the locks that you currently have in order to assist you in choosing the best replacement patio door lock (you can try this out). This will allow you to determine the type of lock you have, the features it has and what type of security it provides. This is a good step to take before you begin shopping for new hardware as it will help ensure that your new lock fits perfectly and is securely fastened.

You can often determine the type of lock by looking at the outside of the door frame or the inside of the handle. You can also see the type of locking mechanism your door is equipped with, if it is equipped with a latch, or if it requires a key to open the lock.

The most commonly used lock in replacing upvc door lock and handle patio doors is a euro cylinder that operates with either an handle or the use of a key. The cylinder is fitted with an sleeve that holds the pin in place and prevents it from being removed from the lock. The euro cylinder may offer an amount of security, based on the manufacturer. If the lock has been inspected for anti-snap approval and is certified for anti-snap, it will be capable of providing some degree of security. However, here at SheffLOCK we always recommend the diamond-certified 3 star (TS007 ULTION) euro cylinder. It provides a lot more protection from lock snapping.

A mortise is a type of steel locking mechanism that is incorporated into the frame. This kind of lock is found on both wood and aluminum patio doors. They are extremely secure if installed correctly, as the bolt is embedded into the frame and the intruder will have to cut through the patio door frame and window sill to gain access to the lock.

Find out the width of your door

Patio doors are often the most vulnerable points of entry into your home, particularly in the case of large quantities of glass installed. A good quality lock will make your home more secure and could save you money on your insurance policy. The most common types of patio door locks are:

There are a myriad of locks to choose from based on your design and functional requirements. Some have bolts that twist, cylinder locks that use a key and mortise locks with spring-loaded hook latch.

You can determine the thickness of your current patio door by using the tape measure along the edge of the door, and record the measurement. It's also a good idea to take measurements of the frame of the door (known as jamb) in various locations and take the smallest measurement to help determine which patio door lock type will be most suitable for you.

You must determine the width of your opening prior cost to replace upvc door lock mechanism near me installing the patio door. This is the area the door will fit in and is the measurement that the manufacturer will require to supply you with a new door. Ask your supplier for help or refer to our guide if you're not certain how to measure.

You should also take a measurement of the approximate height of your opening, but this can be a challenge because the floor of your home might not be level. You can measure in three places, the centre along both sides, and the corners, and then record the smallest measurement to get your height.

Once you have your measurements, you can choose a lock that fits your door and your home. You can also install an additional security lock to give you additional protection against intruders like a Patlock handle lock designed to prevent the door from being opened when it's not locked or secured.

A central rail lock that comes with a key is the best option to ensure maximum security. This bolts the door of your patio into the frame at several points and requires just one turn to lock them all together. They provide a higher level of security than basic locks and could result in a reduction in your home insurance premiums.

Make sure you check the End-Face plate

When you are ready to replace the handle on your patio door, you need to identify the specifics of your current lock to choose the right replacement. This will ensure that the new handle and spindle are a perfect fit on the patio door and that the new latch will hold the latch's hasp.

First, examine the face plate at the end to determine whether it is round or square. This will allow you to determine the type of mortise lock you have. You should also take note of the screw's diameter to ensure you find a replacement that fits the screws you have already.

It is also important to take a look at the position of your existing keyway. There are a variety of patio door locks. It is essential to know what type of lock comes with to match it with the right keyway opening.

Then, look at the latch jamb of your door to see how close it is to the frame's edge. If the latch keeper on the door jamb is far behind, it will be hard to get the latch hasp in place. The door will not close properly. Fortunately, this can usually be corrected by adding washers or a shim behind the latch keeper on the jamb.

If you own mortise locks E2105 The latch keeper needs to be at least 1 inch from the frame edge. You might also want to measure the size of the latch holder to ensure it is at the right level.

In most instances the latch holder will be slightly higher than the keyway opening on your current lock. This is to ensure that it does not interfere with your sliding door's operation.

If your latch keeper isn't at the right height you can lower it by putting screws or nuts into the bottom of the keeper and tightening it. Be careful not to overtighten this screw, as it could cause damage to the lock mechanism or the upvc door locks replacement. If the latch holder is too high, you can raise the latch holder by tightening a nut screw at the top of the keeper on the jamb.

Be sure to check the screw holes

Many patio door locks use bolts for locking the door, while others use a key-operated cylinder. Both types of locks require regular maintenance to ensure they function correctly. To help keep your patio door safe, Lowe's offers a wide selection of sliding glass door hardware and locking solutions. You can select from a wide selection of lock styles including bolts with a twist, cylinder locks that use keys and mortise locking systems using hook latches.

Some homeowners are unable lock their patio doors due to the latch has fallen down or is not aligned with the strike plate. In some instances, the issue may be due to small door shifts or water ingress that has affected the moveable parts of your lock. In these instances an oil spray may be all that is needed to make your door lock once more.

Start by taking measurements of the width and length of your existing lock. A ruler or tape measure can be used to determine this measurement, which will let you select a replacement lock that is the correct size. Next, look at the faceplate at the end to determine if it is square or round. This is crucial as it allows you to choose the lock that is suitable for you by using the correct screw hole type.

Also, you will want to take note of the location of the screw holes on your current lock. If they are located at the top or bottom of the leading edge, then a new lock with an extended bolt will be required. Installing a tamper proof lock that has a screw that is not removable is another option.

After you have selected the kind of lock that is most suitable to your door, the process of installation can be fairly simple. If you're not comfortable installing the patio door lock yourself It is recommended that you seek professional help. A professional locksmith or door hardware expert can provide expert guidance and assistance, as well as ensure that the lock is correctly installed. With proper care your patio door locks will be a reliable and effective security feature that can ensure that you and your family are secure from intrusions.