How to Replace a UPVC Window Handle

Don't panic when your upvc handle has become broken. Replacing the upvc handle on a window is a simple task that can be done in a couple of simple steps.

It doesn't matter if you have an in-line or a crank espagnolette window handle, they all have an oval spindle protruding from the back plate. This spindle is then fitted into the locking device.

Identify the type and size of the lock and handle

Over time, window replacement handles and locks can get damaged or lose functionality. It is possible to fix this problem without having to replace the entire uPVC unit. The first thing you need to do is identify the type and size of your handle and lock. This will help you determine the replacement parts you need.

Identifying the kind of handle can be identified by looking at the base of the handle. A screw or pin will secure the handle to its base. If the screw is missing it could be an indication that the handle has split away from its base. If the handle is broken internally and does not hold onto the spindle anymore, it may also be a sign that the handle should be replaced.

There are many uPVC handles however the Espag handle is the most common. They are usually secured with two bolts and the spindle works with the locking mechanism in the frame of the window. These handles are usually used on uPVC tilt and turn windows.

Cockspur handles are a different kind of uPVC handle. Similar to the Espag handle, but they have a low projection from the frame. These handles are typically used on older uPVC window frames.

There are also Venetian window handles that are similar to the Espag handle, but they have a flat base that allows them to be fitted in a flush position with the frame. They are a great option for homeowners who are looking for an elegant and stylish handle that will blend in with their uPVC window frames. These handles come in a range of colors that will match any decor.

Measure the spindle

It is important to be aware of how the handle installed before you can order a replacement. This will determine how tight or loose it is and whether it will fit properly into the window frame. This can be determined by identifying the handle type and measuring the spindle. The spindle is a steel shaft that connects your handle to the lock on the window frame. It's available in a variety of sizes with the current industry standard being 8mm. Older handles might have a cross-section of 9mm therefore you'll need to take measurements of your old handle to make sure you get the correct size replacement.

There are various kinds of window handles. The most popular are the inline Espagnolette handles and Cockspur handles. They operate an locking mechanism within the window with shootbolt rods that lock the window when it's closed. They are held in place with pins or screws based on the kind of handle you have.

You can find replacement window panels upvc window handles online and in a lot of DIY stores. They are available in a variety of finishes and are suitable for new and replacement windows. They can also be key-locking or fire-escape non-locking for additional security.

To remove the old handle just open the window towards the door and unscrew all the screws holding it in place. Be careful not to cause damage to the screws and place them in a container to be stored for future use. Once the screws have been removed, gently pull out the handle and take a measurement from the base to the top of the spindle. This will give you the information you need to buy the right replacement. The spindle of the handle is the steel shaft that connects it to the lock gearbox in the window frame.

Remove the old handle

Changing the handle of a uPVC handle is a straightforward task that takes less than five minutes if you've got the appropriate tools. The first step is to identify the kind of lock and handle that will help you identify the right replacement window glass. You can then measure the spindle to ensure that the handle is suitable. Then, you'll have to remove the handle you have been using and replace it with the new one.

Most uPVC handles are inline Espagnolette handles, with a central spindle that slots into the locking mechanism of the window. They are generally simple to remove, but they may require force if they become stuck. The handle is typically held in place by two screws which can be removed with the help of a screwdriver. Depending on the kind of handle, you might also have to remove any pins holding it in place.

After the screws have been removed Once the screws are removed, you can remove the handle. When the handle is open and the top of the baseplate will be visible. This will reveal two screws that can be unscrewed. There's also a small silver or other colour sticker that needs to be removed if in place.

You can now screw in the new handle using the screws that came with the old handle. Align the screw holes on the window with the holes in the handle. After you've done this then you can replace the caps on the screws and test the new handle to confirm that it works properly. It's simple to replace a uPVC, but you have to do it correctly.

Replace the handle with the new one.

If you've managed to successfully remove the handle that you have on the frame, it's time to install your new handle. Begin by locating and taking off the screws with your screwdriver. After the screws are removed, put them in a secure place before moving on to the next step.

Then, place the new spindle inside the handle by aligning it with the hole in the handle and screwing it in. Align the holes in the handle with those in the window frame. Use a screw of the same size as the previous.

The uPVC Espag handle is equipped with a spindle of 7mm square that turns the lock mechanism on the window. This type cost of windows replacement handle can be commonly found in modern uPVC windows. uPVC Cockspur (also called by the name Cotswold) handles feature an extended, curving nose that locks onto the frame's outer or cross member of the transom bar. They are often found on older uPVC Windows.

It is essential to lock and unlock the window numerous times after the handle is installed. If everything goes according to plan, the new uPVC handle should be properly attached and running smoothly. If you have any problems, these steps will help you determine the cause and fix it swiftly. If you're having trouble with your uPVC handle or are experiencing other glazed home improvement issues don't hesitate to call us at Bridgewater glass window replacements for professional assistance. Our glaziers are able to repair or replace different window handles and frames. This makes us an ideal choice for double glazing replacement window glazing.

Test the new handle

In time and with regular use, uPVC handles and locks may be damaged and wear and wear and. They can become less secure and efficient which is why it's crucial to replace them as soon as you can. This is also a great thing to do when upgrading your windows. Changing your handle and locking mechanism will help to maintain the integrity of your new windows.

When it is to uPVC window handles, there are a variety of different styles. Some are secured with pins or screws, whereas others feature blades that fit into the lock mechanism. Each type has its own method of replacement, therefore it's crucial to know what kind you have before working on it.

The most well-known type of window handle is called the espag. They are typically found on newer uPVC Windows. The spindle extends from the handle into the lock gearbox and activates the locking system when you open the window. They are also simple to take off. However, it is important to be cautious not to damage the mechanism or the handle.

Cockspur window handles are another popular option for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur is attached to the striker plates that are wedge-shaped on the frame. This type of handle is more difficult to repair than other types however, it's still a good choice for most homes.

Venetian handles are attached by two bolts, and they have a narrow projection on the frame. This differs from the Espag handle. These handles are ideal if your goal is to have a flush-fitting handle that blends in with uPVC window frames. These are perfect for commercial and residential properties.