Autowatch Ghost Installers Nottingham

Everyday more cars are stolen without keys. Cloning devices and door lock picks are easily accessible online, allowing thieves to clone their remote keys and start your vehicle in as little as 30 seconds.

The Autowatch ghost installation immobiliser stops this by preventing your vehicle's ignition until a unique, personalized PIN is entered. It is quiet, discrete and does not use LED indicators to ensure it is not able to be traced by criminals.

The quiet and discrete

Everyday more cars are stolen without keys of the owner, with key cloning equipment readily available to thieves online. Our Autowatch Ghost immobiliser prevents this theft by stopping your vehicle from starting until you input your unique personalised codes, which can be entered using existing buttons on the dashboard or steering wheel.

When you enter your personal pin code and then enter it, the Ghost will disable all electronics within the vehicle and stop the engine from getting started. It is designed to be quiet & silent, meaning that it will not activate any alarm sensors within the vehicle and that no LED indicators are displayed. This makes it almost impossible to detect the presence of scanners to track vehicle theft. Our installation engineers are TASSA registered, DBS security checked, and system-trained technicians. They will install the Ghost for you in a covert way, leaving no proof that it was ever fitted.

Our Ghost 2 device is also an auto tracker that transmits GPS signals that can be sent to your phone, allowing you to locate the vehicle and track its movements on an interactive map. This lets you keep track of the location of your car whilst it is in garage for service or repairs.

The application can be turned on/off by enabling or disabling it within the app for phones, ensuring that you have total control over your vehicle's security. The Autowatch Ghost application can also be used to enable a 'Service Mode' for your vehicle, which allows you to leave the car without entering the disarming button sequence or even having to be inside the vehicle. This is particularly useful for those who have to drop off their vehicle at the local garage to receive a service or repair.

Our latest application allows users to use their mobile phone and your Ghost-II will be automatically disarmed once it is within the vehicle's range This makes security easy and convenient. This feature can be activated even when your phone is in the sleep mode, which is in your pocket.

Easy to Operate

The Autowatch Ghost immobiliser works silently to stop vehicle thieves from copying your key fob or hacking your system. The device is directly connected to the vehicle's CAN Data Network. It will only allow the vehicle to start after a PIN code is entered using the original buttons on your vehicle. The user can enter the code in a concealed location or via the phone app. Autowatch Ghost is installed under the steering wheel or dash by TTW, so only you'll know it's there. It is also weatherproof, and is so small that it is undetectable by car thieves looking for circuit breakers or the distinctive click sound of an ignition relay.

The availability of low-cost tools for cloning and door lock pick sets enables thieves to steal almost any vehicle today without the owner's keys. The Autowatch Ghost immobiliser prevents this and can be ported to another vehicle if the vehicle is compatible.

The device is set up by a qualified technician at the location of his choice, and then hidden so that it is invisible to thieves even when the engine runs. The ghost installations also doesn't send out any radio frequency signals, which means it is impossible for thieves to track the device using RF scanning or code-grabbing technology.

The Ghost can also be set to Service/Valet Mode, so that you don't need to be concerned about the technician knowing your pin code if your vehicle is taken to the garage for maintenance. The ghost immobiliser install can accomplish this since it relies on the original buttons of the vehicle, therefore no extra wiring is required.

The Autowatch Ghost is also a TASSA Verified Product which means that a number of insurance companies recognize it as an additional security measure. You should speak to your insurance company prior to installing the Ghost immobiliser. This way, you can obtain a good price on your policy and be sure that your vehicle is secured against a costly theft claim.

No Radio Frequency Signals

Autowatch Ghost is the only system that can prevent vehicle theft through modern day key copying. If your vehicle is in a bodyshop, garage or dealership and someone inside copies your key fob it is possible that the Ghost immobiliser still cuts out the engine since only you can enter the pin code that you have chosen to start the vehicle. If the device is compromised by a TASSA-approved installer, our TASSA-approved installers will guide you on how to change the pin code.

The Ghost does not transmit radio frequency signals, as other systems do, such as trackers. This means that thieves are unable to identify it using codes grabbers or RF scanners. This feature, in conjunction with the discreet and quiet operation, makes it an extremely secure and effective option.

iPhone users can connect to with the Ghost-II using a simple app. Simply enable the application when you want to use your car, and when you get close to the Ghost-II it will automatically arm it. Then, you can enter the vehicle and drive away, it is safe to do so because your phone will automatically arm when you are away from the Ghost-II.

This is a great and practical way to make extreme security accessible whenever you need to drive your car. This app is available for free from the iPhone App Store.

The Ghost-II is different from the original Autowatch Ghost as it does not have LED indicators. This means that thieves cannot detect it unless they are close enough to the vehicle to open the window and switch on the light.

The Autowatch Ghost-II has a power cut-disconnect function that will shut off the engine of your car and also shut off the power to the ignition when the system is activated. This is a great security feature to prevent theft of your vehicle when on a long trip or have put the keys in ignition. This is a great safety feature for business and family users who have to park in public areas or for those who work on the road.

No LED Indicators

The Ghost is connected to the vehicles CAN Data system and a personalised PIN code is entered via select options on the dash board or steering wheel which allows the device to be activated. It does not utilize LED indicators, making it undetectable using scanners for vehicle theft and completely silent to operate. It is also able to be transferred from one vehicle to another, provided that the new vehicle is compatible in the first place and that technology developments in that time haven't rendered it obsolete later on. Holbon UK Ltd will install the Ghost immobiliser and provide the owner's manual and certificate of authenticity.