automotive key repair (look at here) - What to Do When Your Car Key Won't Turn in the Ignition

We've all been there - your car keys won't engage the ignition. It could occur at the most inconvenient time, such as when you're loading your car with groceries or heading home from work.

Instead of panicking There are many solutions to get you back on the road. Here are some common automotive key repair keys near me problems and their possible solutions:

Broken or bent keys

The most common reason why an owner of a car cannot start their vehicle is a bent key. Straightening the key is an easy fix. This may sound simple however it is crucial to do it carefully. The key is extremely thin, and bending it even small enough could cause it to break.

You'll need a solid work surface as well as a pair of pliers to do this. Take one end of the key using the pliers, and then bend it back until it is straight. This should be done on a flat surface, or in a vise. Then, you can put it in the lock to see if it changes.

If not, it might be time to have a new key cut. You don't need to call a locksmith and your existing key will work.

Keep a spare key in your purse so you're not left without the ability to get into your vehicle in the event that your key breaks.

If you're experiencing problems with a bent or broken key, try applying some grease on it prior to trying to insert it into the lock. This will allow it to move through the cylinder, and prevent it from becoming stuck. You can apply graphite or spray lubricant. Make use of the plastic tube that comes with the spray to ensure a more precise application. This will also help prevent water from destroying your device.

Stuck pins and springs

A pin (also called a roll pin, or a spring) may get stuck. Pins are small 2-3 in (5.1-7.6 cm) long piece of steel with hollow ends, which are used to connect 2 parts of an equipment. In most instances, you can take out a pin by simply pulling it out with your fingers or a wrench.

If you own an older car key fob repairs near me that is equipped with microchip keys it is likely that the key will need to be programmed to work with your car. This procedure can be easy or difficult depending on the car's manufacturer and model.

Contact us if you require assistance with your automotive locks or keys! We are able to repair, replace or program almost any vehicle key.

Gear selector

If your car's gear selector gets stuck in park mode, it's important to bring it to a mechanic as soon as you notice it. This is a security issue and you could cause serious damage to your vehicle if you continue driving. This problem could also indicate bigger problems in the transmission system itself, which could be costly to repair.

Luckily, most of the time, this issue can be easily fixed. The most common reason the gear selector can get stuck is that one of the cable ends has snapped or disconnected from the lever itself. The mechanic can repair this issue in a matter of minutes.

In some cases the bushings on the gear selector might be damaged or worn. These are rubber covers that are placed around the joints within the gear system to help it move more fluidly. These rubber covers function similarly to the cartilage in your joints, and therefore need to be flexible and healthy.

You can extend their life by doing a few basic things. You should avoid the gear selection during extremely cold temperatures. This is because the cables that control the gear are prone to freezing and cracking. You should also replace the bushings with premium quality ones, such as those from First Line.

These bushings are an essential element of your gear selector and should not go unnoticed. If you notice yours is worn out it is best to visit an auto repair car keys near me shop that is specialized in Land Rover repairs. They will help you locate the ideal parts to repair the gear selector mechanism. They can also offer many other services like maintenance and service for your transmission.

Dead battery

If you turn your key repairs in the ignition and you hear nothing but a click, then your battery is dead. As batteries age, they undergo an natural process that causes them to die early. The negative plates of your car battery will start to be covered with sulfate crystal deposits.

A dead battery may cause the loss of the electrical power in your vehicle, causing the radio or electric windows to malfunction. If your car is having issues getting started in cold weather, this could be a good sign that it's time for a new battery.

Sometimes, your issue might not be caused by a dead battery, but rather an issue with the charging system of your vehicle. This issue can be solved by having your mechanic check that the alternator, serpentine belt, and battery cables are all functioning correctly.

Another common automotive key repair is the key fob that has stopped functioning properly. The key fob is connected to your vehicle's computer, and relays signals and commands between the engine and the accessory systems. The system could become confused or cease communicating with your car if it is exposed to extreme temperatures or is wet.

It is possible to reset a lost key fob by following the instructions provided in the owner's manual. Based on the vehicle you have you may have to open and close the doors, turn the lights and other electronic devices on and off, press a certain sequence of buttons, or even close and open the windows. If this doesn't solve your fob, it might need to be professionally programmed by an expert technician. Try these easy techniques before buying an entirely new fob.

Ignition socket

Modern car keys include a transponder chip built into them that sends signals to a receiver in the ignition when they are inserted. The signal informs the immobilizer inside the car whether the key is the right one for it to start. In the 1990s, car theft became an issue. Many manufacturers put in this transponder system for security and insurance reasons.

If you have a brand newer car, the only way to replace your keys could be through the dealership or by calling the manufacturer directly. Before you go there note down the VIN number of your vehicle (vehicle identification number). This number can be found on the dashboard, in the door jamb or in the owner's guide.

Bring your current working key to an participating AutoZone store and an associate will use a machine to trace the contours of your key blank to accurately replicate the original mobile key repair near me. They will then cut the new key using an exact cutting machine on site. If your key is equipped with a blade, a fob or a thick head that is grey or black, it will need to be programmed to your car before you can use it to start the motor.